Extended Personal Glitch

Note: I found a way to extend the 'Personal glitch'. Basically, It is the same glitch, but a different way to do it so that there is a possability to get more power. It is only a minor part of the glitch changed, but the instructions are kind of different.
Step 1: Start with all level 3 performance parts. Go to dyno and select a race type (every time you enter the dyno go to this race type). Set the ECU and turbo to default, by pressing square. Dyno run and exit.
Step 2: Go to the customization menu and go into the ECU and return to stock, and install level 1. Next, go over to the turbo and make sure you have level 3 installed.
Step 3: Go into the Dyno and into the ECU and put the 1st bar as low as it can go. Next, go to the turbo and IN ORDER bring down the 1st, 2nd, 3rd, and 4th bars as low as they can go. Dyno run the car and exit.
Step 4: Go to the customization menu and go into the ECU and installed level 2 and 3. Next go to the turbo and install level 1.
Step 5: Go into the Dyno and go over to the turbo and IN ORDER bring down the 7th, 8th, and 9th bar as low as they can go. Dyno run and exit.
Step 6: Go to the customization menu and go into the ECU and select return to stock and install level 1. Next go over to the turbo and install level 3, DON’T install level 2 and then 3, install level 3 DIRECTLY.
Step 7: Go into the dyno and go into the ECU and click down once on the first bar. You should see the red increase. If nothing happens or if the red decreases, this glitch does not work for that car.
Step 8: If the red does increase, put down the first bars so that all the red is in the first bars. This is not to important but it is what I like to do.
Step 9: Go to the turbo and IN ORDER bring down the 1st, 2nd, 3rd, and 4th bars as low as they can go. Dyno run and exit.
Step 10: Go to the customization menu and go into the ECU and installed level 2 and 3. Next go to the turbo and install level 1
Step 11: Go into the Dyno and go over to the turbo and IN ORDER bring down the 7th, 8th, and 9th bar as low as they can go. Dyno run and exit.
Step 12: Go to the customization menu and go into the ECU and select return to stock and install level 1. Next go over to the turbo and install level 3, DON’T install level 2 and then 3, install level 3 DIRECTLY
Step 13: Continue this and you will get more and more red in the ECU. Do this untill no more red apperears. When no more red appears, you are done. move the red around to where you want it. This is the way you will have it, and beyond this point you cannot change it. Now default the turbo (but dont do anything elce to it). dyno run then exit. Install ECU level 3 and turbo level 3.
Note: This glitch does not work on all cars, but it is really effective. Once you are done though, dont touch the ECU or all the extra red will dissaper.